CARDONE New 67-0014 Fuel Injection Throttle Body

Brand:CARDONE New Part Number:67-0014 Category:Fuel Injection Throttle Body Medium Description: Short Description: SKU:51394694 Availability:0 Candid0 DC Manufactured in:United States

Nissan Cube 2014-09, NV200 2021-13, Sentra 2019-07, Tiida 2011-07, Versa 2012-07

CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go \"above and beyond\" the average brake caliper.
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Mounting bracket is included where applicable for a hassle-free installation.
Pistons are durable, resistant to cracking or pitting and handle great loads.
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
New bleeder screws provide trouble-free bleeding and a positive seal.
New washers are included where applicable for a proper seal.
A plastic cap plug protects every brake port thread to ensure a trouble free installation.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Attributes

Product Condition:
Remanufactured
FAQs:
How do you clean?
Features and Benefits:
Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
FAQs:
We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore. For the exterior we use a glass bead blasting process. We also go through further disassembly for cleaning of internal components.
Features and Benefits:
A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow.
FAQs:
How do you test?
Features and Benefits:
The high and low integrated throttle position sensors are tested to match OE characteristics throughout the entire operational range.
FAQs:
Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points.
Features and Benefits:
Final assemblies are tested for all critical functions, including response time and airflow at multiple points.
FAQs:
What do you replace?
Features and Benefits:
Each unit is guaranteed to function like the original.
FAQs:
We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
FAQs:
What's an Electronic Throttle body?
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
FAQs:
The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
FAQs:
What happens when an Electronic Throttle Body fails?
FAQs:
When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine's speed back to an idle rpm.
FAQs:
What causes the Electronic Throttle Body to fail?
FAQs:
The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
FAQs:
Is there anything that has to be done after installing the replacement throttle body?
FAQs:
A relearn calibration procedure is necessary after installation of replacement throttle body.
FAQs:
Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
FAQs:
Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
FAQs:
Do you sell throttle body spacers?
FAQs:
We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
FAQs:
The OE throttle body has coolant hoses attached. What's the purpose?
FAQs:
The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
FAQs:
Is it ok to bypass the coolant hoses?
FAQs:
No; bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
FAQs:
Do all throttle bodies have an ice breaker mode for extreme cold starts?
FAQs:
Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
FAQs:
What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
FAQs:
The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
Package Contents:
Electronic Throttle Body, Instruction Sheet
Gasket Or Seal Included:
No
Housing Color/Finish:
Gray/Unfinished
Housing Material:
ALUMINUM
Throttle Body Actuation Type:
Electric
Throttle Body Inlet Shape:
Round
Throttle Body Outlet Shape:
Round
E-Waste:
YES

Package Information

Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00884548129405Package Bar Code:00884548129405Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0

Extended Information

Canadian Harmonizing Tariff Code:8481800081Country of Origin (Primary):USEmission Code:Legal USHarmonized Tariff Code (HTS):8481809020Harmonized Tariff Code (Schedule B):8481809035Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:35MSDS Required Flag:NoPallet Layer Maximum:7Remanufactured Part:YesWarranty Distance:18000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:12Warranty Time UOM:Month

Interchange

Nissan:161193RC0ANissan:16119ET000Nissan:16119ET00ANissan:16119ET00BNissan:16119ET00C
Vehicle Applications
YearsMakeModelTrimEngineDriveNotes