Mercedes-Benz E350 2016-12, E400 2018-15, SLK300 2016, SLK350 2016-12
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
Features and Benefits: | All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability. |
FAQs: | Why is the pump making a whining noise all of the time? |
Features and Benefits: | All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material. |
FAQs: | A whining pump is usually caused by air in the system. Remove reservoir lid and inspect fluid level and condition. If fluid has foam or air bubbles present, you must bleed the system again. Some systems are very difficult to bleed manually and may require the use of a vacuum pump to extract all of the air from the system. |
Features and Benefits: | Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life. |
FAQs: | Why do I still have hard steering in one direction after I replaced the pump? |
Features and Benefits: | Units are supplied with 100% tested and calibrated pressure relief valves. |
FAQs: | The problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions. |
FAQs: | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
Features and Benefits: | FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance. |
FAQs: | The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
FAQs: | Most likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring. |
FAQs: | Should I ever change my fluid, even though nothing is wrong? |
FAQs: | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
Reservoir Included: | NO |
Hose Port Type: | O-Ring |
Power Steering Pump Inlet Attachement Type: | Hose Barb |
Power Steering Pump Outlet Attachment Type: | BOLT-ON |
Pulley Included: | YES |
Pulley Attachement Type: | Press-on |
Power Steering Reservoir Cap Included: | NO |
Housing Material: | ALUMINUM |
Remote Reservoir: | NO |
Mounting Hardware Included: | No |
Power Steering Outlet ID Size: | 0.434 |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00884548084766Package Bar Code:00884548084766Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8413600011Country of Origin (Primary):MXEmission Code:Legal USHarmonized Tariff Code (HTS):8413600020Harmonized Tariff Code (Schedule B):8413600020Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:72MSDS Required Flag:NoPallet Layer Maximum:3Remanufactured Part:YesWarranty Distance:36000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:36Warranty Time UOM:Month
Interchange
Mercedes-Benz:0064665801