Cadillac Escalade 2005-02, Escalade ESV 2005-03, Escalade EXT 2005-02; Chevrolet Astro 2005-03, Avalanche 1500 2005-02, Avalanche 2500 2006-02, Express 1500 2008-03, Express 2500 2005-03, Silverado 1500 2006-99, Silverado 1500 HD 2006-05 2003-01, Silverado 1500 HD Classic 2007, Silverado 2500 2004-99, Silverado 2500 HD 2010-01, Silverado 2500 HD Classic 2007, Silverado 3500 2006-04, Silverado 3500 Classic 2007, Silverado 3500 HD 2008-07, Suburban 1500 2006-00, Suburban 2500 2009-00, Tahoe 2006-00; GMC Safari 2005-03, Savana 1500 2008-03, Savana 2500 2005-03, Sierra 1500 2006-99, Sierra 1500 HD 2006-05 2003-01, Sierra 1500 HD Classic 2007, Sierra 2500 2004-99, Sierra 2500 HD 2010-01, Sierra 2500 HD Classic 2007, Sierra 3500 2006-04, Sierra 3500 Classic 2007, Sierra 3500 HD 2008-07, Yukon 2006-02 2000, Yukon XL 1500 2006-01, Yukon XL 2500 2013-00; Hummer H2 2008-03
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
FAQs: | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
Features and Benefits: | Pistons are durable, resistant to cracking or pitting and handle great loads. |
Features and Benefits: | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
FAQs: | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
Features and Benefits: | Mounting bracket is included where applicable for a hassle-free installation. |
FAQs: | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAQs: | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
Features and Benefits: | Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish. |
FAQs: | Car pulls to one side during braking. Why? |
Features and Benefits: | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
Features and Benefits: | New bleeder screws provide trouble-free bleeding and a positive seal. |
FAQs: | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
FAQs: | Brakes squeal all of the time. What's causing the squeal? |
Features and Benefits: | New washers are included where applicable for a proper seal. |
FAQs: | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
Features and Benefits: | A plastic cap plug protects every brake port thread to ensure trouble-free installation. |
FAQs: | Could calipers be the cause of a low brake pedal? |
Features and Benefits: | New stainless steel hardware clips and new mounting pins are included where applicable. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
FAQs: | What type of grease is used on floating caliper mounting pins? |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | A silicone grease is used on floating caliper mounting pins. |
FAQs: | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs: | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Brake Caliper Finish: | Powder Coated |
Piston Quantity: | 2 |
Caliper Color: | Red |
Installation Hardware Included: | YES |
Package Contents: | Caliper; Bracket; Hardware Kit |
Bleeder Port Size: | M10x1.5 |
Inlet Port Size: | M10x1.5 |
Piston Material: | Phenolic |
Piston Size (OD) (in): | 2.004 |
Piston Size (OD) (mm): | 50.9016 |
Pads Included: | No |
Mounting Bolts Included: | NO |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617666923Package Bar Code:00082617666923Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8708309920Country of Origin (Primary):USEmission Code:Legal USHarmonized Tariff Code (HTS):8708305090Harmonized Tariff Code (Schedule B):8708300050Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:35MSDS Required Flag:NoPallet Layer Maximum:7Remanufactured Part:YesWarranty Distance:24000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:24Warranty Time UOM:Month
Interchange
Cadillac:18040100Chevrolet:18040100Chevrolet:25848001GMC:18040100GMC:25848001Hummer:18040100Hummer:25848001