Buick Centurion 1973-71, Electra 1976-71, Estate Wagon 1976-71, LeSabre 1976-71, Riviera 1976-71; Cadillac Commercial Chassis 1978-77, Fleetwood 1978-77; Checker Marathon 1979-71, Taxicab 1974-71; Chevrolet Bel Air 1975-71, Biscayne 1972-71, Blazer 1974-72, Brookwood 1972-71, C10 1978-75, C10 Pickup 1974-72, C10 Suburban 1978-72, C20 1978-75, C20 Pickup 1974-72, C20 Suburban 1978-72, C30 1978-75, C30 Pickup 1974-71, Caprice 1976-71, G10 1978-75, G10 Van 1974, G20 1978-75, G20 Van 1974-72, G30 1978-75, G30 Van 1974-71, Impala 1976-71, K5 Blazer 1978-75, Kingswood 1972-71, P10 1978-75, P10 Van 1974-72, P20 1978-75, P20 Van 1974-72, P30 1978-75, P30 Van 1974-71, Townsman 1972-71; GMC C15 1978-75, C15 Suburban 1978-75, C15/C1500 Pickup 1974-72, C15/C1500 Suburban 1974-72, C25 1978-75, C25 Suburban 1978-75, C25/C2500 Pickup 1974-72, C25/C2500 Suburban 1974-72, C35 1978-75, C35/C3500 Pickup 1974-71, G15 1978-75, G15/G1500 Van 1974, G25 1978-75, G25/G2500 Van 1974-72, G35 1978-75, G35/G3500 Van 1974-71, Jimmy 1978-72, P15 1978-75, P15/P1500 Van 1974-72, P25 1978-75, P25/P2500 Van 1974-72, P35 1978-75, P35/P3500 Van 1974-71; Oldsmobile 98 1976-71, Custom Cruiser 1976-71, Delta 88 1976-71; Pontiac Bonneville 1976-71, Catalina 1976-71, Grandville 1975-71, Laurentian 1976, Parisienne 1976
Engineered to meet or exceed O.E. performance.
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Zinc plating offers a silver O.E.-like finish.
Ideal for commercial use as well as performance vehicles.
Every unit is 100% tested to ensure reliable performance.
No core return required.
Precision machined heat treated center shafts.
Includes necessary mounting hardware (where applicable)
Documents
Attributes
Product Condition: | Remanufactured |
Features and Benefits: | Pistons are durable, resistant to cracking or pitting and handle great loads. |
FAQs: | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
Features and Benefits: | Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance. |
FAQs: | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations. |
Features and Benefits: | Mounting bracket is included where applicable for a hassle-free installation. |
FAQs: | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
FAQs: | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
Features and Benefits: | Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish. |
FAQs: | Car pulls to one side during braking. Why? |
Features and Benefits: | New banjo bolts are included where applicable to ensure a perfect fit and quick installation. |
Features and Benefits: | New bleeder screws provide trouble-free bleeding and a positive seal. |
FAQs: | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
Features and Benefits: | New washers are included where applicable for a proper seal. |
FAQs: | Brakes squeal all of the time. What's causing the squeal? |
FAQs: | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
Features and Benefits: | A plastic cap plug protects every brake port thread to ensure trouble-free installation. |
FAQs: | Could calipers be the cause of a low brake pedal? |
Features and Benefits: | New stainless steel hardware clips and new mounting pins are included where applicable. |
FAQs: | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
Features and Benefits: | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
FAQs: | What type of grease is used on floating caliper mounting pins? |
Features and Benefits: | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
FAQs: | A silicone grease is used on floating caliper mounting pins. |
FAQs: | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
FAQs: | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
Brake Caliper Finish: | Oil Emulsion |
Piston Quantity: | 1 |
Caliper Color: | Gray |
Installation Hardware Included: | YES |
Package Contents: | Caliper; Hardware Kit |
Piston Material: | Steel |
Piston Size (OD) (in): | 2.935 |
Piston Size (OD) (mm): | 74.549 |
Pads Included: | NO |
Mounting Bolts Included: | Yes |
E-Waste: | NO |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082617010764Package Bar Code:00082617010764Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Canadian Harmonizing Tariff Code:8708309990Country of Origin (Primary):MXEmission Code:Legal USHarmonized Tariff Code (HTS):8708305090Harmonized Tariff Code (Schedule B):8708300050Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:43MSDS Required Flag:NoPallet Layer Maximum:4Remanufactured Part:YesWarranty Distance:24000Warranty Distance UOM:MIWarranty Special UOM:Text Warranty MessageWarranty Time:24Warranty Time UOM:Month
Interchange
Buick:18005037Cadillac:18005037Chevrolet:18005037GMC:18005037Oldsmobile:18005037Pontiac:18005037